Page 4 of 4

1
  thm_PB290062.jpg  
 
Here is the speedometer signal converter. The velcrow goes on first.
2
  thm_PB290063.jpg  
 
Here is a shot of where it will go.
3
  thm_PB290064.jpg  
 
Here Obi one makes a hole to pass the power wire(orange).
4
  thm_PB290065.jpg  
 
Here we pass it thru.
5
  thm_PB290067.jpg  
 
The SSC gets glued to my kitty.
6
  thm_PB290068.jpg  
 
These are the ground wires which we put together.
7
  thm_PB290069.jpg  
 
Here we tap into the power wire off the TCM. There is chat that this might not be the best place to get it from. Especially when you have to service your TCM.
8
  thm_PB290071.jpg  
 
Here Obi one strips the wire to tap in.
9
  thm_PB290072.jpg  
 
The open wound.
10
  thm_PB290073.jpg  
 
Here you see the 2 kitties resting.
11
  thm_PB290074.jpg  
 
Another angle. These are Obi ones kats.
12
  thm_PB290075.jpg  
 
Here the power wire(orange) gets attached.
13
  thm_PB290076.jpg  
 
14
  thm_PB290077.jpg  
 
Solder smoke in action.
15
  thm_PB290078.jpg  
 
Little blow torch to shrink the shrink tubing.
16
  thm_PB290079.jpg  
 
After this the install is complete. I then install the tranny fluid and take it for a cruise. THESE GEARS KICK SOME SERIOUS BUTT! I love what they have done to my performance. My supercharger feels even better. I LOVE IT.

Home  |  Prev  |  Next  |  End